LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Transmission. Refer to Transmission Replacement (Front Wheel Drive)Transmission Replacement (All Wheel Drive)
    2. Fig 1: Flex Plate Holder
    GM4199147Courtesy of GENERAL MOTORS COMPANY
  2. Install the EN-652  holder (1) in order to fix the flex plate.
    3. Fig 2: Automatic Transmission Flex Plate And Bolts
    GM4199148Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD Automatic Transmission Flex Plate Bolts (2) (Qty: 8)
  4. Remove the EN-652  holder.
  5. Remove Automatic Transmission Flex Plate (1)
scientia non olet · About LEMON Manuals