Thermostat Bypass Pipe Installation
WARNING: This page is about a different variant/trim than selected.
- Clean all sealing surfaces.
- Insert a NEW gasket. (2)
- Install Thermostat Bypass Pipe (3)
- Install the 3 thermostat bypass pipe bracket bolts (5, 6) and tighten to 10 N.m (89 lb in).
- Install and tighten Thermostat Bypass Pipe Bolts (1) (Qty: 2) to 10 N.m (89 lb in)
- Install Clamps (4) (Qty: 2)
CAUTION:
Refer to Fastener Caution