LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Intake Manifold Disassemble

Intake Manifold Disassemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Intake Manifold And Components
    GM3283919Courtesy of GENERAL MOTORS COMPANY
  1. Remove Throttle Body Assembly @ Intake Manifold (2). Refer to Throttle Body Assembly Replacement
  2. Remove the intake air pressure and temperature sensor bolt (3).
  3. Remove the intake air pressure and temperature sensor (4).
  4. Remove the 6 intake manifold cover washers (5).
  5. Remove the intake manifold cover (1) from the intake manifold (2).
scientia non olet · About LEMON Manuals