Glow Plug Installation
WARNING: This page is about a different variant/trim than selected.
Special Tools
EN-6104 Glow Plug Socket
Equivalent regional tools :Special Tools
- Install the 4 glow plugs (1) and tighten to 16.5 N.m (12 lb ft), using the EN-6104 socket.
CAUTION:
Refer to Fastener Caution
NOTE:
To aid in hand starting glow plugs into their bores, a hose or tube with an inner diameter of 4 mm (0.2 in) can be used as an extension when installed on the end of the glow plug.