Fuel Injection Fuel Feed Pipe Installation - Fuel Rail To Fuel Injector

WARNING: This page is about a different variant/trim than selected.

Fig 1: Fuel Injection Fuel Feed Pipes And Fuel Rail

GM4421866

Courtesy of GENERAL MOTORS COMPANY

Install NEW Fuel Injection Fuel Feed Pipes (2) (Qty: 4)
Install Fuel Injection Fuel Feed Pipes (2) (Qty: 4) @ Fuel Injector (3)
Install Fuel Injection Fuel Feed Pipes (2) (Qty: 4) @ Fuel Rail (1)

CAUTION:

Refer to Fastener Caution

Tighten Fuel Injection Fuel Feed Pipes (2) (Qty: 4) @ Fuel Injector (3) to 28 N.m (21 lb ft)
Tighten Fuel Injection Fuel Feed Pipes (2) (Qty: 4) @ Fuel Rail (1) to 28 N.m (21 lb ft)