LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Fuel Injection Fuel Feed Pipe Installation - Fuel Injection Pump To Fuel Rail

Fuel Injection Fuel Feed Pipe Installation - Fuel Injection Pump To Fuel Rail

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Injection Fuel Feed Pipe And Components - Fuel Injection Pump to Fuel Rail
    GM4421864Courtesy of GENERAL MOTORS COMPANY
  1. Install NEW Fuel Injection Fuel Feed Pipe (2)
    2. NOTE:

    Counterhold at the fuel injection pump hexagon connector.

  2. Install Fuel Injection Fuel Feed Pipe (2) @ Fuel Injection Pump (4)
  3. Install Fuel Injection Fuel Feed Pipe (2) @ Fuel Rail (3)
    4. NOTE:

    Counterhold at the fuel injection pump hexagon connector.

    CAUTION:

    Refer to Fastener Caution

  4. Tighten Fuel Injection Fuel Feed Pipe (2) @ Fuel Injection Pump (4) to 28 N.m (21 lb ft)
  5. Tighten Fuel Injection Fuel Feed Pipe (2) @ Fuel Rail (3) to 28 N.m (21 lb ft)
  6. Install and tighten Fuel Injection Fuel Feed Pipe Bracket Bolt (1) to 9 N.m (80 lb in)
scientia non olet · About LEMON Manuals