LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Exhaust Pressure Differential Sensor Pipe Removal

Exhaust Pressure Differential Sensor Pipe Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exhaust Pressure Differential Sensor Pipe And Components
GM2900092Courtesy of GENERAL MOTORS COMPANY
  1. Remove and DISCARD the 2 clamps (3).
  2. Disconnect the 2 hoses from the exhaust pressure differential sensor (2).
  3. Remove and DISCARD the 2 clamps (6).
  4. Disconnect the 2 hoses from the catalytic converter connection pipes (1).
  5. Remove the exhaust pressure differential sensor pipe bracket bolt (4).
  6. Remove the exhaust pressure differential sensor pipe (5).
scientia non olet · About LEMON Manuals