LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Drive Belt Tensioner And Bolt
GM2900083Courtesy of GENERAL MOTORS COMPANY
  1. Install Drive Belt Tensioner (1)
  2. CAUTION:

    Refer to Fastener Caution

  3. Install and tighten Drive Belt Tensioner Bolt (2) to 58 N.m (43 lb ft)