LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Crankshaft Position Sensor Removal

Crankshaft Position Sensor Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Crankshaft Position Sensor, Bolt And Retainer Spring
    GM3282618Courtesy of GENERAL MOTORS COMPANY
  1. Remove the crankshaft position sensor bolt (1).
  2. Remove the crankshaft position sensor retainer spring (2) from the crankshaft position sensor (3)
    3. Fig 2: Crankshaft Position Sensor
    GM3282619Courtesy of GENERAL MOTORS COMPANY
  3. Remove the crankshaft position sensor (1).
scientia non olet · About LEMON Manuals