Crankshaft Position Sensor Reluctor Ring Removal

Special Tools 

EN-652  Flywheel Holder

Equivalent regional tools: Special Tools 

Fig 1: Flex Plate Holder
Courtesy of GENERAL MOTORS COMPANY
1. Install the EN-652  flywheel holder (1) in order to fix the automatic transmission flex plate (2).
Fig 2: Automatic Transmission Flex Plate And Bolts
Courtesy of GENERAL MOTORS COMPANY
2. Remove and DISCARD Automatic Transmission Flex Plate Bolts (2) (Qty: 8)
3. Remove the EN-652  flywheel holder (3).
4. Remove Automatic Transmission Flex Plate (1)
Fig 3: Crankshaft Position Sensor Reluctor Ring And Pin
Courtesy of GENERAL MOTORS COMPANY
5. Remove Crankshaft Position Sensor Reluctor Ring (1)