LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Catalytic Converter Installation

Catalytic Converter Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Catalytic Converter, Clamp, Nuts And Gasket
    GM4211385Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW gasket. (2)
  2. Install Catalytic Converter Clamp (1)
  3. Install Catalytic Converter (3)
    4. CAUTION:

    Refer to Fastener Caution

    NOTE:

    Only tighten the catalytic converter clamp bolt that a rotation of the catalytic converter is possible.

  4. Tighten Catalytic Converter Clamp (1) to 6 N.m (53 lb in)
  5. Install and tighten Catalytic Converter Bracket Nuts (4) (Qty: 2) to 22 N.m (17 lb ft)
  6. Tighten Catalytic Converter Clamp (1) to 25 N.m (18 lb ft)
scientia non olet · About LEMON Manuals