LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Diagnostic Information And Procedures >> Engine Compression Test >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Compression And Cylinder Leakdown Test Adapter
    GM4848822Courtesy of GENERAL MOTORS COMPANY
  1. Install the EN-51110  Compression and Cylinder Leakdown Test Adapter into the fuel injector bore.
  2. Connect the EN-26999  gauge to the adapter (1).