Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that DTCs P2ADA, P2ADB, P2ADC, and P2ADD are not set.
- If any of the DTCs are set
Refer to Circuit/System Testing
- Go to next step: If none of the DTC are set
- If any of the DTCs are set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify that DTCs P2ADA, P2ADB, P2ADC, and P2ADD are not set.
- If any of the DTCs are set
Refer to Circuit/System Testing
- Go to next step: If no DTC Is set
- If any of the DTCs are set
- All OK.