Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P018B, P018C, P018D, P0641, P1007, P1029, P102A, P102B, P102C, P1255, P129D, P129F, P12A6, P20CD, P2227, P2228, P2229, P2230, or U18A2 is not set.
Fuel pump control is enabled.
Ignition voltage is between 11 - 32 V.
Engine is running for more than 40 s.
KR73 Ignition Main Relay is commanded On.
Low fuel level warning not present.

The DTC runs continuously when the conditions above are met.