LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Diagnostic Information And Procedures (P205B - P2BAA) And Symptoms) >> Diagnostic Information And Procedures >> DTC P227C-P227E: Barometric Pressure (BARO) Sensor 2 Circuit >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P227C 

The ECM detects that the BARO sensor 2 is less than 50 kPa (7.3 PSI) for greater than 5 s.

DTC P222D 

The ECM detects that the BARO sensor 2 is greater than 115 kPa (16.7 PSI) for greater than 5 s.

DTC P227E 

The ECM detects that the BARO sensor 2 signal had an accumulated variation, over a 13 ms sample period, of greater than 200 kPa (29.0 PSI) for greater than 50 s.

scientia non olet · About LEMON Manuals