Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition On.
- Verify DTC P1103, P16D7, P16D8, P16D9 or P262B is not set.
- If DTC P1103, P16D7, P16D8, P16D9 or P262B is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If DTC P1103, P16D7, P16D8, P16D9 or P262B is not set
- If DTC P1103, P16D7, P16D8, P16D9 or P262B is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed in the Freeze Frame/Failure Records data.
- Verify that DTC P2264 is not set.
- If DTC P2264 is set
Refer to Circuit/System Testing
- Go to next step: If DTC P2264 is not set
- If DTC P2264 is set
- All OK