Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
- DTC P0071-P0074, P0116-P0119, P0128, P111E, P2008-P2010, P2015-P2017 = Not set
- Engine = Running
- Ignition Voltage = Greater than 11 V
- Engine Coolant Temperature = Greater than 59°C (138°F)
- Outside Ambient Air Temperature Sensor Signal = Greater than -7°C (19°F)
- Intake Manifold Runner Control Valve Command = ON For greater than 30 s
- Intake Manifold Runner Control Valve Command = Steady State For greater than 1 s
- Frequency the DTC runs = Continuously - After the running conditions are met