Conditions for Running the DTC

P205B

• DTC P205C, P205D, or U010E is not set
• The ignition is ON and the engine is not running.
• The battery voltage is greater than 11 V.
• The ignition has been OFF for greater than 8 h
• This DTC runs continuously when the above conditions are met.

The DTC runs continuously when the above conditions are met.

P205C or P205D

• DTC P1051, P20B9, P20BB, P20BC or U010E is not set.
• The ignition is ON or the engine is running.
• The engine is not cranking.
• The battery voltage is greater than 11 V.

These DTCs runs continuously when the above conditions are met.