Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection (KL9)
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
Remove Exhaust Front Pipe. Refer to Exhaust Front Pipe Replacement (LH7)

Fig 1: Piston Oil Nozzle Oil Control Solenoid Valve, Bolts And Electrical Connector

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Inspect the piston oil nozzle oil control solenoid valve o-rings and replace as necessary.