LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Repair Instructions) >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (AWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Tank Fuel Pump Module And O-Ring
    GM4673682Courtesy of GENERAL MOTORS COMPANY
  1. Install NEW O-Ring (2)
  2. Install Fuel Tank Fuel Pump Module (1)
    3. Fig 2: Electrical Connector, Transfer Hose And Fuel Tank Vent Hose
    GM4673684Courtesy of GENERAL MOTORS COMPANY
  3. Connect Fuel Tank Vent Hose (3). Refer to Plastic Collar Quick Connect Fitting Service 
  4. Connect Transfer Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
  5. Connect Electrical Connector (1)
    6. Fig 3: Fuel Pump Lock Ring
    GM4673681Courtesy of GENERAL MOTORS COMPANY
  6. Install Fuel Pump Lock Ring (1) - CH 52075  Fuel Sender Lock Ring Wrench
    7. Fig 4: Electrical Connectors, Fuel Pump Fuel Return Hose, Fuel Pump To Fuel Filter Hose And Fuel Tank Vent
    GM4673680Courtesy of GENERAL MOTORS COMPANY
  7. Connect Fuel Tank Vent (4). Refer to Plastic Collar Quick Connect Fitting Service 
  8. Connect Fuel Pump to Fuel Filter Hose (3). Refer to Plastic Collar Quick Connect Fitting Service 
  9. Connect Fuel Pump Fuel Return Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
  10. Connect Electrical Connectors (1) (Qty: 2)
  11. Install Fuel Tank. Refer to Fuel Tank Replacement (AWD) 
scientia non olet · About LEMON Manuals