Removal Procedure

WARNING: This page is about a different variant/trim than selected.

WARNING:

Refer to Exhaust Service Warning

Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement

Fig 1: Electrical Connector And Exhaust Temperature Sensor

GM4725900

Courtesy of GENERAL MOTORS COMPANY

Disconnect Electrical Connector (1) @ Exhaust Temperature Sensor (2)
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle

Fig 2: Exhaust Temperature Sensor And Retainer

GM4725906

Courtesy of GENERAL MOTORS COMPANY

Unclip Exhaust Temperature Sensor (1) @ Retainer (2)

Fig 3: Exhaust Temperature Sensor

GM4725911

Courtesy of GENERAL MOTORS COMPANY

Remove Exhaust Temperature Sensor (1)