LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Control Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Transmission control. Refer to Transmission Control Replacement
    2. Fig 1: Left I/P Center Support Bracket Bolt, Automatic Transmission Control Bracket And Nuts
    GM4573590Courtesy of GENERAL MOTORS COMPANY
  2. Remove the left instrument panel center support bracket bolt (1).
  3. Remove the automatic transmission control bracket nuts (2) from the automatic transmission control bracket (3).
    4. Fig 2: Right I/P Center Support Bracket Bolt And Automatic Transmission Control Bracket
    GM4573596Courtesy of GENERAL MOTORS COMPANY
  4. Remove the right instrument panel center support bracket bolt (1).
  5. Remove the automatic transmission control bracket (2).
scientia non olet · About LEMON Manuals