LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Electronic Transmission Shift Control Pushbutton Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the electrical connector.
    2. Fig 1: Electronic Transmission Shift Control Pushbutton
    GM4694657Courtesy of GENERAL MOTORS COMPANY
  2. Install the electronic transmission shift control pushbutton assembly (2)
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the screws.
  4. Install the front floor console transmission shift opening bezel. Refer to Front Floor Console Transmission Shift Opening Bezel Replacement (Terrain)
scientia non olet · About LEMON Manuals