LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Wiring Harness Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Automatic Transmission Wiring Harness
    GM4491984Courtesy of GENERAL MOTORS COMPANY
  1. Install the automatic transmission wiring harness (1) to the transmission. Refer to Control Valve Body Assembly Installation (without ETRS)Control Valve Body Assembly Installation (with ETRS)
    2. Fig 2: Control Valve Body Cover
    GM4489058Courtesy of GENERAL MOTORS COMPANY
  2. Install the control valve body cover (1) to the transmission. Refer to Control Valve Body Cover Replacement 
scientia non olet · About LEMON Manuals