LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the left front wheel house liner. Refer to Front Wheelhouse Liner Replacement - Left Side (Equinox)Front Wheelhouse Liner Replacement - Left Side (Terrain) .
    2. Fig 1: Input Speed Sensor, Bolt And Seal
    GM4487717Courtesy of GENERAL MOTORS COMPANY
  2. Remove the input speed sensor bolt (1).
  3. Remove the input speed sensor (2).
  4. Remove the input speed sensor seal (3).
scientia non olet · About LEMON Manuals