LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Input Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Input Speed Sensor, Bolt And Seal
    GM4487717Courtesy of GENERAL MOTORS COMPANY
  1. Install the input speed sensor seal (3).
  2. Install the input speed sensor (2).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the input speed sensor bolt (1) and tighten to 9 N.m (80 lb in).
  4. Install the left front wheel house liner. Refer to Front Wheelhouse Liner Replacement - Left Side (Equinox)Front Wheelhouse Liner Replacement - Left Side (Terrain) .
scientia non olet · About LEMON Manuals