LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0335 - P26C8) And Symptoms) >> Diagnostic Information And Procedures >> DTC P2635: Fuel Pump Flow Performance >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different variant/trim than selected.
NOTE:

Do not replace the fuel pump driver control module based on a history DTC P2635. DTC P2635 may be stored but that does not indicate a failure of the fuel pump driver control module. Refer to Strategy Based Diagnosis for further history DTC diagnostics.

  1. Verify the proper fuel system pressure. Refer to Fuel System Diagnosis .
    • If the fuel pressure is not normal 

      Repair the fuel system as necessary.

    • Go to next step: If the fuel pressure is normal 
  2. All OK.