LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0335 - P26C8) And Symptoms) >> Diagnostic Information And Procedures >> DTC P16A7, P16AF Or P16B3: Engine Controls Ignition Relay Feedback Circuit 2 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P16A7 

The ECM detects that the voltage level difference is greater than 3 V between the engine controls ignition relay feedback circuit 2 and the ignition 1 signal circuit for greater than 1 s.

P16AF 

The ECM detects the engine controls ignition relay feedback circuit 2 is less than 5 V.

P16B3 

The ECM detects the engine controls ignition relay feedback circuit 2 is greater than 4 V for greater than 5 s.

scientia non olet · About LEMON Manuals