LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Controls And Fuel - 2.0L (LTG) - Diagnostic Information And Procedures (P0335 - P26C8) And Symptoms) >> Diagnostic Information And Procedures >> DTC P127C, P128A, P128B, P128C, P128D, P128F, P16E4 Or P16E5: Fuel Rail Pressure Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P127C 

The engine control module detects fuel pressure sensor 2 SENT digital read value is less than 94 for less than 1 s.

P128A 

The engine control module detects fuel pressure sensor 1 SENT digital read value is greater than 4, 089 for greater than 3 s.

P128B 

The engine control module detects fuel pressure sensor 2 SENT digital read value is greater than 4, 089 for greater than 3 s.

P128C 

The engine control module detects communication errors on the fuel pressure sensor temperature 1 SENT signal circuit for less than 1 s.

P128D 

The engine control module detects communication errors on the fuel pressure sensor temperature 2 SENT signal circuit for less than 1 s.

P128F 

The engine control module detects fuel pressure sensor SENT signal discrepancies for greater than 3 s.

P16E4 

The engine control module detects fuel pressure sensor SENT signal shorted low for greater than 3 s.

P16E5 

The engine control module detects fuel pressure sensor SENT signal shorted high for greater than 3 s.