LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 1.5L (LYX) - Repair Instructions >> Repair Instructions >> Vacuum Pump Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove Engine Control Module Bracket - Engine Control Module Bracket Replacement 
  2. Reposition the engine wiring harness junction block.
  3. Remove Vacuum Pump Assembly - Vacuum Pump Assembly Replacement 
    4. Fig 1: Vacuum Pump Seal
    GM4823059Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the vacuum pump seal (1) with a suitable tool.
scientia non olet · About LEMON Manuals