LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Center Pillar Upper Trim Panel Replacement (Terrain)

Center Pillar Upper Trim Panel Replacement (Terrain)

Fig 1: Center Pillar Upper Trim Panel (Terrain)
GM4748485Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Disable the SIR system. SIR Disabling and Enabling
  2. Remove the front seat belt anchor plate tensioner bolt. Front Seat Belt Retractor Replacement
1 Center Pillar Upper Trim Panel Bolt Cap
2 Center Pillar Upper Garnish Molding Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
3 Center Pillar Upper Trim Panel

Procedure

  1. Pull the trim panel toward the inside of the vehicle to disengage the retainers and to clear the front seat tensioner assembly.
  2. When replacing the center pillar upper trim panel, feed the seat belt through the panel.
  3. Ensure the seat belt webbing does not become trapped during installation.
  4. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals