Conditions for Setting the DTC

DTC B127C 01, B127D 01, B126F 01, B126E 01

• DTC B1325 is not current
• A short to voltage is detected on the specified (+) or (-) signal circuit for more than 1.5 seconds

DTC B127C 02, B127D 02, B126F 02, B126E 02

• DTC B1325 is not current
• A short to ground is detected on the specified (+) or (-) signal circuit for more than 1.5 seconds

DTC B127C 04, B127D 04, B126F 04, B126E 04

• DTC B1325 is not current
• An open is detected on the specified (+) or (-) signal circuit for more than 1.5 seconds

DTC B127C 1A, B127D 1A, B126F 1A, B126E 1A

• DTC B1325 is not current
• An out of range voltage is detected on the specified (+) or (-) signal circuit for more than 1.5 seconds