LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Bolt EV LT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> Instrument Cluster Display Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Perform the scan tool control function: Driver Information Center Segments

    Verify the component activates: Driver Information Center Segments - All

    • If the component does not work as specified 

      Replace the component: P16 Instrument Cluster

    • Go to next step: If the component works as specified 
  3. Perform the scan tool control function: All Indicators

    Verify the component activates: Indicators - All

    • If the component does not work as specified 

      Replace the component: P16 Instrument Cluster

    • Go to next step: If the component works as specified 
  4. Perform the scan tool control function: Instrument Cluster Dimming

    Verify operating the controls yields the expected results.

    • If the component does not work as specified 

      Replace the component: P16 Instrument Cluster

    • Go to next step: If the component works as specified 
  5. All OK.
scientia non olet · About LEMON Manuals