S38 Ignition Mode Switch
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | - | - | - | Not Occupied | - | - |
| 2 | 0.35 | BN/BK | 5720 | Ignition Mode Switch Accessory LED Signal | I | BTM |
| 3 | 0.35 0.35 |
GN/BK L-GN/BK |
3558 3558 |
Passive Start Switch Signal 2 Passive Start Switch Signal 2 |
I I |
BTM BTM |
| 4 | - 0.5 |
BK/ BK |
1450 1450 |
Ground Ground |
I I |
- BTM |
| 5 | 0.35 0.35 |
BU/BK L-BU/BK |
5719 5719 |
Ignition Mode Switch Start LED Signal Ignition Mode Switch Start LED Signal |
I I |
BTM BTM |
| 6 | 0.35 0.35 |
BU/GN L-BU/L-GN |
5723 5723 |
Ignition Mode Switch Mode Voltage Ignition Mode Switch Mode Voltage |
I I |
BTM BTM |
| 7 | 0.35 | BK/GY | 3559 | Passive Start Switch 2 Low Reference | I | BTM |
| 8 | 0.5 | YE | 6817 | LED Backlight Dimming Control | I | BTM |