X902 License Lamp Harness to Liftgate Jumper Harness

-
Connector Part Information Harness Type: License Lamp OEM Connector: Not Available Service Connector: Service by Harness - See Part Catalog Description: 10-Way F	Connector Part Information Harness Type: Liftgate Jumper OEM Connector: 6098-7709 Service Connector: Service by Harness - See Part Catalog Description: 10-Way M 1.2 Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-12 (BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-64B (LT BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required
III	Not Required	J-35616-13 (BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
2	0.35	VT/GY	539	I	UVC	Run/Crank Ignition 1 Voltage	2	0.35	VT/GY	539	III	UVC
3	0.35	GN/YE	6846	I	-	Rear License Lamp Control	3	0.35	GN/YE	6846	III	-
4	0.35	GY/YE	6972	I	UVC	Camera Signal 2 +	4	0.35	GY/YE	6972	III	UVC
5	0.35	WH/BU	6973	I	UVC	Camera Signal 2	5	0.35	WH/BU	6973	III	UVC
8	0.5	BK	1150	II	-	Ground	8	0.5	BK	1150	III	-
9	0.5	GY	7069	II	UVC	Camera Shield Ground Extension	9	0.5	GY	7069	III	UVC
10	0.75	BK/WH	1651	II	UVC	Signal Ground	10	0.75	BK/WH	1651	III	UVC

Connector Part Information Harness Type: License Lamp OEM Connector: 6098-7717 Service Connector: Service by Harness - See Part Catalog Description: 10-Way F 1.2 Series (BK)	Connector Part Information Harness Type: Liftgate Jumper OEM Connector: 6098-7709 Service Connector: Service by Harness - See Part Catalog Description: 10-Way M 1.2 Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-16 (LT GN)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-13 (BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Terminal Type ID	Option	Function	Pin	Size	Color	Circuit	Terminal Type ID	Option
1	-	-	-	-	-	Not Occupied	1	-	-	-	-	-
2	0.35	VT/GY	539	I	UVC	Backup Lamp Control Run/Crank Ignition 1 Voltage	2	0.35 0.35	GN/WH VT/GY	24 539	II II	UVC UVC
3	0.5	GN/YE	6846	I	-	Rear License Lamp Control	3	0.35	GN/YE	6846	II	-
4	0.35	GY/YE	6972	I	UVC	Camera Signal 2 +	4	0.35	GY/YE	6972	II	UVC
5	0.35	WH/BU	6973	I	UVC	Camera Signal 2	5	0.35	WH/BU	6973	II	UVC
6	-	-	-	-	-	Not Occupied	6	-	-	-	-	-
7	0.35	GN/WH	24	I	UVC	Backup Lamp Control	7	-	-	-	-	-
8	0.5	BK	1150	I	-	Ground	8	0.5	BK	1150	II	-
9	0.5	GY	7069	I	UVC	Camera Shield Ground Extension	9	0.5	GY	7069	II	UVC
10	0.75	BK/WH	1651	I	UVC	Signal Ground	10	0.75	BK/WH	1651	II	UVC