Headlamp Replacement (T4L, Buick)

Fig 1: Headlamp (T4L, Encore)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove Front Bumper Fascia. Refer to Front Bumper Fascia Replacement (Buick)
1	Headlamp Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp Procedure Disconnect the electrical connector. Aim the headlamps after replacement. Refer to Headlamp Aiming

Callout

Component Name

Preliminary Procedure
Remove Front Bumper Fascia. Refer to Front Bumper Fascia Replacement (Buick)

Headlamp Screw (Qty: 4)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Headlamp

Procedure