LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Ignition Lock Cylinder Theft Deterrent Sensor Cover Replacement

Ignition Lock Cylinder Theft Deterrent Sensor Cover Replacement

Fig 1: Ignition Lock Cylinder Theft Deterrent Sensor Cover
GM4053613Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the ignition and start switch housing. Refer to Ignition and Start Switch Housing Replacement .
1 Ignition Lock Cylinder Theft Deterrent Sensor Cover Bolt (Qty: 3)
CAUTION: Refer to Fastener Caution .

Procedure

  1. Use a vise plier to remove the 3 bolts.
  2. Install the 3 NEW bolts and tighten until head tears off.
2 Ignition Lock Cylinder Theft Deterrent Sensor Cover
Procedure 
Remove the ignition lock cylinder theft deterrent sensor cover.
scientia non olet · About LEMON Manuals