LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Engine Controls And Fuel - 1.6L (LWC) - DTC P0010 To DTC P0238) >> Diagnostic Information and Procedures >> DTC P018B-P018D (Chassis Control Module) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running.
  2. Verify the scan tool Fuel Pressure Sensor Voltage parameter is between 0.2 - 4.8 V.
    • If not between 0.2 - 4.8 V 

      Refer to Circuit/System Testing.

    • Go to next step: If between 0.2 - 4.8 V 
  3. All OK.
scientia non olet · About LEMON Manuals