Circuit/System Verification
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
- Engine running.
- Verify the parameters listed below do not display Malfunction:
- HO2S 1 or 2 Heater Control Circuit Low Voltage Test Status
- HO2S 1 or 2 Heater Control Circuit Open Test Status
- HO2S 1 or 2 Heater Control Circuit High Voltage Test Status
- If Malfunction is displayed
Refer to Circuit/System Testing
- Go to next step: If Malfunction is not displayed
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing
- Go to next step: If the DTC does not fail
- If the DTC sets
- All OK.