Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
P0010, P0013, P2088, P2089, P2090, P2091
- Camshaft Position Actuator Solenoid Valve = On
- Ignition Switch Position = Run/Crank
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P0011, P0014
- DTC P0010, P0013, P0016, P0017, P0335, P0336, P0340, P0341, P0365, P0366 = Not set
- Desired Camshaft Position & Camshaft Position=6 to 29°
- Desired Camshaft Position = Does not vary greater than 3° - For greater than 3 s
- Engine = Running
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met