LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Driver Assistance Systems) >> Diagnostic Information and Procedures >> Side Blind Spot Alert System Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the side blind spot alert indicators located in each outside rearview mirror briefly turn ON and OFF during the system self test immediately after the ignition is turned ON.
    • If either indicator does not briefly turn ON and OFF 

      Refer to Circuit/System Testing

    • Go to next step: If both indicators briefly turn ON and OFF 
  3. All OK.
scientia non olet · About LEMON Manuals