Driver Seat Cushion Heater Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the front seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement .
1	Driver Seat Cushion Heater Procedure Carefully remove the driver or passenger seat cushion heater from cushion. When installing the heater, glue on the heater starting on the rear side of the cushion and fix it bit by bit moving forward. At last, fix the heater to the outer edge of the cushion. When installing the cushion heater to cushion, take care that the heater fits close to the channels in the cushion.

Callout

Component Name

Preliminary Procedures
Remove the front seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement .

Driver Seat Cushion Heater

Procedure

Carefully remove the driver or passenger seat cushion heater from cushion.
When installing the heater, glue on the heater starting on the rear side of the cushion and fix it bit by bit moving forward. At last, fix the heater to the outer edge of the cushion.
When installing the cushion heater to cushion, take care that the heater fits close to the channels in the cushion.