Circuit/System Description

When a lumbar switch is pressed to inflate the lumbar support, battery voltage is applied through the switch contacts and the inflate signal circuit to the seat lumbar adjuster valve assembly. In response to this signal, the lumbar adjuster valve assembly energizes its internal inflate solenoid and applies battery voltage through the lumbar support pump control circuit to the pump to inflate the appropriate support bladder until the switch is released. When the switch is pressed to deflate the lumbar support, battery voltage is applied through the switch contacts and the deflate signal circuit to the seat lumbar adjuster valve assembly. The lumbar adjuster valve assembly energizes its internal deflate solenoid and air is released from the bladder until the switch is released.