LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Dangers, Warnings, And Cautions) >> Introduction >> Steering Angle Sensor Initialization Warning

Steering Angle Sensor Initialization Warning

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

For vehicles with electric power steering (EPS) and without a vehicle stability enhancement program, the steering angle sensor MUST always be initialized after the battery has been disconnected. Failure to initialize the steering angle sensor could limit the operation of the EPS system and result in personal injury.

To ensure proper initialization of the EPS system, do the following:

  1. The engine should be on with the vehicle stationary.
  2. Turn the steering wheel counterclockwise until it stops.
  3. Turn the steering wheel clockwise until it stops.