LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Rear Suspension System) >> Repair Instructions >> Rear Spring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the rear axle with a tall jack stand near the shock absorber.
  3. Remove the lower shock absorber bolts. Refer to Shock Absorber Replacement .
  4. Using the tall jack stands, slowly lower the rear axle in order to remove tension from the rear springs.
  5. GM2027770

    Remove the spring (1).

  6. GM2027771

    Remove the upper spring seat/jounce bumper (1) from the spring, while leaving the lower spring seat on the axle.

scientia non olet · About LEMON Manuals