LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Rear Suspension System) >> Repair Instructions >> Rear Spring Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2027771

    Install the upper spring seat/jounce bumper (1) on the spring.

  2. GM2027770

    Install the spring (1) making sure the lower coil is seated into the lower spring seat.

  3. Using the jack stands, raise the rear axle in order to compress the rear springs.
  4. Install the lower shock absorber bolts. Refer to Shock Absorber Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals