LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Rear Suspension System) >> Repair Instructions >> Rear Spring Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the rear axle with a tall jack stand near the shock absorber.
  3. Remove the lower shock absorber bolts. Refer to Shock Absorber Replacement .
  4. Using the tall jack stands, slowly lower the rear axle in order to remove tension from the rear springs.
  5. GM2027770

    Remove the spring (1).

  6. GM2189306

    Remove the lower and upper rear spring insulators (1, 2).

scientia non olet · About LEMON Manuals