Equalizer Beam Support Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation . For vehicles with electric parking brake, remove the parking brake cable from the support. Refer to Parking Brake Cable Replacement . Remove the rear V-rod underbody brace. Refer to Underbody Brace Replacement - Rear V-Rod . Remove the equalizer beam center link. Refer to Equalizer Beam Center Link Replacement .
1	Equalizer Beam Support Bolts (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 100 N.m (74 lb ft)
2	Equalizer Beam Support

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
For vehicles with electric parking brake, remove the parking brake cable from the support. Refer to Parking Brake Cable Replacement .
Remove the rear V-rod underbody brace. Refer to Underbody Brace Replacement - Rear V-Rod .
Remove the equalizer beam center link. Refer to Equalizer Beam Center Link Replacement .

Equalizer Beam Support Bolts (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
100 N.m (74 lb ft)

Equalizer Beam Support