Front Suspension Strut Yoke Replacement

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the steering knuckle upper ball stud. Refer to Steering Knuckle Upper Ball Stud Replacement . Remove the steering knuckle. Refer to Steering Knuckle Replacement .
1	Front Shock Absorber Yoke Nut CAUTION: Refer to Fastener Caution . Tighten 70 N.m (52 lb ft)
2	Front Shock Absorber Yoke Bolt
3	Front Suspension Strut Yoke Separate the front suspension strut yoke from the strut assembly using a plastic hammer. Install the strut assembly to the new front suspension strut yoke until the immersion tube of the strut is fully seated into the front suspension strut yoke.