LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2017 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Tire Pressure Monitoring System) >> Diagnostic Information and Procedures >> DTC C0569 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On/Vehicle in Service Mode.
  2. Enter the tire type and pressure information into the K9 Body Control Module with a scan tool. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label .
  3. Ignition OFF, then Ignition On/Vehicle in Service Mode.
  4. Verify DTC C0569 is not set.
    • If the DTC is set 

      Replace the K9 Body Control Module.

    • Go to next step: If the DTC is not set. 
  5. All OK.
scientia non olet · About LEMON Manuals